FIRE HYDRANTS AND FIREFIGHTING EQUIPMENT

Wall-mounted hydrants

Galvanized steel boxes.

Painted with special polyester resins for outdoor use RAL 3000.

Accident-prevention configuration without sharp edges.

Hydrant tap DN 45 PN16 - ISO7.

45 mm diameter piping in accordance with UNI EN 14540 complete with UNI 804 fittings and tie-downs in accordance with UNI 7422 with sleeve covers.

Coupling saddle and identification symbol.

Instructions for use and assembly.

Certified lever or rotary lance.

Numbered seal.

Declaration of CE conformity.

Naspi

Consisting of up to 30 m. of 25 mm. diameter pyton piping in accordance with UNI 9488 - EN 694.

Hose reel with central water supply.

DN 25 full-jet, atomized, shut-off lance.

1" shut-off valve. Steel box 1.5 mm thick.

Epoxy paint 70 micron RAL 3001 red.

Free rear wall of 0.8-mm-thick galvanized steel sheet.

Pre-determined break on 3 sides of cassette for feed pipe passage.

Double sheet steel 1.5 mm door with 180° opening.

Adhesive warning sign conforming to ISO 6390.

Installation instructions.

Pillar hydrants

Overground hydrant DN 80 and DN 100 cast iron, dry type, with automatic frost-proof discharge.

UNI 70 and UNI 100 outlets are made with male connection in accordance with UNI 810 in brass EN 1982.

Opening by unified pentagonal rotating handwheel.

Also available with automatic antifreeze discharge and with a predetermined breaking device that keeps the valve closed in case of accidental impact.

In accordance with UNI EN 14384

Available in depths from 550 mm to 960 mm.

Also available in other diameters and with reductions according to foreign standards (BSS-STORZ-AFNOR.

Subsurface hydrants

Underground hydrant DN 50, DN 65 and DN 80 with bayonet connection.

Main composition: Gray cast iron G - 20 with brass reported seat, brass outlets and plugs.

Water mains connection: Flange reference UNI 2278 - PN 16 EXERCISE PRESSURE

Maximum: 1.6 MP a (16 bar).

Surface Treatment: Anti-rust black.

Also available with threaded connection.

Firefighting Equipment

Piping

Piping connected with fittings in accordance with UNI 804:07 EN 1982 in accordance with UNI EN 671/2:2004 and UNI 10779:2007

UNI 45 piping in accordance with UNI EN 14540 standard, fittings in accordance with UNI 804 standard, ligatures in accordance with UNI 7422 standard with ligature cover sleeves, available in mt. 15 - 20 - 25 - 30 versions

UNI 70 piping to UNI 9487 certified M.I. standard, fittings to UNI 804 standard, tie-downs to UNI 7422 standard with sleeve covers, available in versions of mt. 15 - 20 - 25 - 30

Firefighting lances

Firefighting lances

Lever-operated firefighting lances

Mistral: Constructed brass body and nozzle, synthetic rubber gasket, shockproof MOPLEN cone with slip-resistant coating; available DN 45 (weight 950 g) and DN 70 (weight 930 g)

Jet-spray: lever lance made of aluminum alloy with synthetic rubber gaskets; available DN 45 (weight 1150 g) and DN 70 (weight 2160 g)

Jet-spray 2: Lever lance with protective veil, constructed of aluminum alloy with synthetic rubber seals, brass nozzle; available DN 45 (weight 1150 g) and DN 70 (weight 2960 g)

Rotating fire lances

Miami 45: constructed of nylon 6 and brass with synthetic rubber seals (weight 380 g)

Eurojet 70: constructed of polyamide resin and aluminum alloy with synthetic rubber seals (weight 730 g)

Faucets

UNI pipe fittings.
Hydrant taps.
Handwheels.
Gaskets.
Fixed male-to-male reducers; fixed male-to-female reducers; fixed female-to-female reducers; swivel reducers.
Aluminum dividers with valve; simple 2-way brass dividers; 2-way brass dividers with gate valves; 3-way brass dividers with gate valves; aluminum dividers with valve UNI fittings.

STORZ Taps and Fittings

British Standard Fittings

AFNOR pipe fittings

NFPA pipe fittings

Russian and Spanish pipe fittings

Supply connections

UNI 10779:2007 standard fire engine delivery connections for branch line:

threaded with swivel
threaded with tap
flanged with tap